TUTORIAL TO FLASH/UPGRADE NOKIA MOBILE(YOU CAN DO IT YOURSELF)

I am posting this tutorial with the special request of my blog user Winayak,
If you don't know what is Flashing:
Flashing or Upgrading your mobile is just like installing OS in your PC. But
the only one difference is, in PC processor was designed to work with many OS'
software's, but mobiles are not like PC. That can only work with it's own
software.
Installing OS on PC can be done by connecting CD/DVDdrive or Thump drive
with PC. Like that mobile Flashing can be done by connecting Mobile with PC via
Cable.
For PC you need Setup Package of OS, Like PC mobile need its setup files,
There is a software named Navifirm to obtain these files for
us. you can get it from here:
Download Navifirm

PC os's have a small software that can copy all needed files to Hard Drive
while installing. mobile OS does not have softwares like PC OS's, So we need
another software to do that thing. In this example we are using JAF . You can
get it from here: Download JAF
You need:
You can get flash files on the internet. just google for "FLASH FILE (NOKIA
BB-5)" you'll get what you want.
OR
Use Navifirm (see above for download).
How to use Navifirm:
First of all you need to know yoturmobile RM number and SW version. see
underneath the battery.

eg:
Type: RM-84
CODE: 0539276
Model: N70-1
after this open Navifirm then select like this: Your RM number > SW
version > any language/color you want
then download only *.mcusw,*.ppm and Image files.
after that rename *.mcusw file to *.c0r.
Now we have Flashfiles for selected mobile, and JAF installed on system.
ToDo:
Note:
Don't miss any steps below. READ CAREFULLY****
◆ Disable and Uninstall PC suite ifyou have. and also Uninstall Nokia Software Updater (NSU).
◆ Open JAF (see above for download.)
◆ Clike on tab what mobile you have (like BB5 or WD2) see/know more:BB5
◆ Connect phone in "PC suite" mode.
◆ Tick manual flash , factory set and normal mode. Also CRT 308 but it's already ticked.
◆ If you're flashing a DEAD phone, tick the manual flash, Factory set, Normal mode and dead flash. And remove tick from CRT308
◆ select the
MCU (the renamed**.c0r file),
PPM,
CNT (the **.imagefile)
◆ Plug in the phone to charger.
In case of dead flashing, don't connect the charger yet.
◆ Check cable connection for stable and then HIT "FLASH" .
◆Hit " OK "
In case of dead flashing, When jaf says "PRESS POWER ON NOW" , connect the charger and turn on the phone.
◆ the screen should go white and stay that way.
◆ Don't touch phone or cable till JAF says "done" .
You may need to WAIT upto 10min for JAF finish.
Disclaimer: You should know some basic ideas about what you doing. I am not responsiblefor any loses due to wrong process, incorrect hardware's,careless.